Products

DESCRIPTION

Basic Info.

Model NO.	B1100-MLH
Working Pressure	Low Pressure Pump
Influent Type of Impeller	Single Suction Pump
Position of Pump Shaft	Horizontal Pump
Pump Casing Combined	Horizontal Split Pumps
Mounting Height	Since Irrigation Centrifugal Pumps
Impeller	Semi-Open
Usage	Pump, Pumps
Display	LCD Display
Pressure	Set Pressure on Keypad Directly
Power Range	0.55~1.85kw
Input Voltage	Single Phase 220V
Color	Blue
Frequency	50Hz/60Hz
Transport Package	Packed in Plywood Cases or Carton
Specification	Depend on Models
Trademark	BEDFORD
Origin	Guangzhou, China
Production Capacity	100 Pieces / Week

Product Description

Bedford Variable Speed Water Pressure Booster Pump for Home/ShowerProduct Description:
B1100 Series with superior performance and rich function, can meet the requirement of water supply in different occasions and improve the quality of water supply system to achieve the effect of energy saving and environmental protection.

Model	Input Voltage	Output Power (kW)	Current (A)	Head (m)	Flow (m3/h)	Threaded Bore (Inlet/Outlet)
B1100-MLH20311-S20007	Single Phase 220V50/60Hz	0.55	2.0	37	2	G1/G1
B1100-MLH3041-S2001		0.75	3.2	42	3	G1/G1
B1100-MLH8201-S20025		1.85	7.9	36	8	G1.5/G1.5

Main Features:
Delivery Head: Max.54mFlow:Max.12m³/hStart/stop the pump automaticallyVariable frequency drive to lower pump power consumptionIntegrated matching designMedium Temperature:+15-70%
Application:
Applicable to Villa, School, Hotel, Sauna Room, Garden Irrigation, etc.
Product Details:
Installation/Test-Operation of the Product
1 Environmental Conditions
This product is designed for indoor use. If you want to install the product on outdoor areas, prepare facilities that can provide the product with protection against rain, wind and low temperature.
2 Installation Requirements
As shown in Figure 1, Figure 2, after installing and cleaning the pools, make sure to extract air. If the inside of the pump is filled with air, the pump may overheat by friction during operation to damage the internal parts. The diameter of inlet pipe must be the same or large than the diameter of the pump inlet. The inlet water level shall be higher than 2m from the center of the pump, as shown in Figure 1 and Figure 2. The inlet water level as shown in Figure 3 and Figure 4 is wrong.